Nickel Alloy Tube, Nickel Alloy Heat Exchanger Tubing

Nickel Alloy Tube,  Nickel Alloy Heat Exchanger Tubing

Nickel Alloy Tube are alloys based on Ni-Co-Mo and have high strength, oxidation resistance, corrosion resistance, and other comprehensive performance under the high temperature of 650℃~1000℃.

Nickel Alloy Pipe, Nickel Alloy Tube, 
Inconel 600/601/625/718/800/825/926 etc.

Nickel alloy tube are alloys based on Ni-Co-Mo and have high strength, oxidation resistance, corrosion resistance, and other comprehensive performance under the high temperature of 650℃~1000℃. So the nickel alloy tube is always used in high temperature environment.
The added elements in nickel alloy:
Cr, Ni, Si, S, P, Mn, C, Ti, Mo, V, Nb, Co, Al, Cu, W, Mg, Re, Zr, B, La-based elements, etc.

Products that can be made from nickel alloy:
Nickel alloy tube/pipe, Plate, Strip, Wire, Bar, Flange, Pipe fitting

Common nickel alloy tube is made of the following materials:
Alloy: 20, 28
Alloy: 800, 825, 926
Alloy: 600, 601, 625, 718
Alloy: 400, K500
Alloy: B, B2, C, C276, C2000

Applications:

1. Marine: Marine structures in the marine environment, desalination, seawater farming, seawater heat exchange, etc.
2. Environmental protection: flue gas desulphurization device for thermal power generation, wastewater treatment, etc.
3. Energy field: nuclear power generation, comprehensive utilization of coal, tidal power generation, etc.
4. Petrochemical field: oil refining, chemical equipment, etc.

In the above fields, ordinary stainless steel products are not competent, because nickel alloy products have stronger corrosion resistance, heat resistance, and wear resistance. Therefore, nickel alloy products are indispensable and irreplaceable in engineering construction and other projects.

Nickel Alloy Heat Exchanger Tubing

Nickel Alloy Heat Exchanger Tubing

What inspection will nickel alloy heat exchange tube go through before shipment?

Recently, Mtsco’s 30 tons 625 nickel alloy heat exchange tube production has come to an end, and has entered the sampling inspection stage. This order is of pioneering significance for Mtsco to export nickel alloy products. Based on the strategic cooperation with European customers and the assurance of the best quality, we have online connection with the third party inspection at home and abroad to witness the accuracy of the inspection.

The day before the test, we took a sample from each batch of nickel alloy heat exchange tube with the same heat number, marked them and waited for inspection. The whole process of sampling was recorded by camera to ensure the fairness of the test results.

The inspection of nickel alloy heat exchange tube include mechanical property test, chemical composition analysis, dimension test, PMI test, hydrostatic test, etc. In addition, we also sent the samples to the third party Laboratory for 120 hours intergranular corrosion test.

Mtsco is currently able to provide pipe, coiled tubing, fittings, flanges, plates and strips made of nickel alloy 600/601/625/825/C276/C22/400….. ERAUM products have been used in petroleum, aerospace, military and other fields. The whole process of inspection proves the quality assurance of Mtsco. Made in China has become the synonym of high cost performance. Give us a chance to cooperate, we will create higher value for you.

MTSCO – Nickel Alloy Tubing, Nickel Alloy Pipe

See How We Make it. Nickel Alloy 625 Heat Exchange Tube

See How We Make it. Nickel Alloy 625 Heat Exchange Tube

MTSCO – Austenitic / Duplex steel / Nickel alloy

– To be the most reliable industrial metal service provider in the world

Who MTSCO is?

MTSCO established in 2006, during many years development, nowbecomes a large and professional industrial piping system provider, serving customers from more than 100 countries and regions.

MTSCO - Austenitic / Duplex steel / Nickel alloy
MTSCO – Austenitic / Duplex steel / Nickel alloy

What products can we provide?

MTSCO - Austenitic / Duplex steel / Nickel alloy
MTSCO – Austenitic / Duplex steel / Nickel alloy
MTSCO - Austenitic / Duplex steel / Nickel alloy
MTSCO – Austenitic / Duplex steel / Nickel alloy

What materials can we provide?

Austenitic

304/L/H/N, 316/L/H/N/Ti, 321/H, 309/H, 310S, 347/H, 317/L904L

Duplex steel

31803, 32205, 32750, 32760

Nickel alloy

Alloy B/ N10001, Alloy B2/N10665, Alloy B3/N10675, Alloy C4/N06455, Alloy C22/N06022, Alloy C276/N10276, Alloy C2000/N06200, Alloy G35/N06035, Alloy G30/N06030,
Alloy S/N06635, Alloy N/N10003, Alloy X/N06002, Alloy 188/R30188, Alloy 230/N06230,
Alloy 556/R30556, Alloy 600/ N06600, Alloy 601/N06601, Alloy 617/N06617,
Alloy 625/N06625, Alloy 718/N07718, Alloy X750/N07750, Alloy 800/N08800,
Alloy 800H/N08810, Alloy 800HT/N08811, Alloy 825/N08825, Alloy 925/N09925,
Alloy 926/N08926, Alloy 400/ N04400, Alloy K500/N05500
Precipitation-hardening Steels: 254SMO/S31254, 17-4PH, 17-7PH, 15-7PH
Nickel: N4/UNS N02201, N6/UNS N02200

How can MTSCO service customers?

MTSCO’s ISO9001 Quality System is issued by TUV. Our full and professional inspection reports contain two parts, one is self-inspection of the requirements beyond ISO9001, which is 100% inspected by our own QC; another is 100% inspected by professional QC teams.

MTSCO - Austenitic / Duplex steel / Nickel alloy
MTSCO – Austenitic / Duplex steel / Nickel alloy

Thank you very much for reading this, I wonder if my presentation will help you with your current problem? Looking forward to hearing from you!

FAQ

1. Can you provide samples?

Of course, We can provide a few sample tubes for you to inspect and experiment.

2. Can we mark our logo on the product?

Yes

3. What is your packing?

Woven bags/Wooden boxes/Wooden reel/Iron reel and other packaging methods.

4. What inspection will you do?

In addition to routine surface and dimensional inspection. We can also do tensile, hardness and chemical composition analysis, and NDT like ultrasonic, eddy current, hydraulic testing.

5. What certificates do you have?

ISO9001/PED/AD2000/TS/ABS/CCS/BV/DNV……

6. What is your minimum order quantity(MOQ)?

According to different types of products, you can consult for details.

7. How long is your delivery time?

Products in stock: Within 5-7 days.

Customized products: 30-90 days, which is determined according to the product category.

8. What is your terms of payment?

T/T, L/C,O/A,D/P……


Feedback about: Nickel Alloy Tube, Nickel Alloy Heat Exchanger Tubing

Send Inquiry by feedback form learn more about product detail, price, etc. Your email address will not be published. Required fields are marked *